AV Young Fly reel Components
Site Navigation Menu
Fly Reel Components.
Brass Reel Foot $AUST 50
SS Pawl $AUST 12
SS Gear $AUST 12
Email: AV Young avytasmania@gmail.com
I'm offering some of the components of the reels I make individually so you can use them to repair or make your own reels.
Reel foot is made from brass. Designed to accept 3mm CS screws.
The reel foot is made by me in my workshop and comes well finished though you would need to buff it. See the technical drawing for details.
The gear drawing is scaled 5:1 @A4 due to its small size. All dimensions are in mm.
The reel foot drawing is scaled 1:1 @A4. All dimensions are in mm
Both the gear and pawl are laser cut from 2mm thick stainless steel and require a slight amount of finish work with a fine file.
The pawl drawing is scaled 5:1 @A4 due to its small size. All dimensions are in mm.
The pawl will work with Hardy Marquis and any other reel of the same design and dimesnions.
